Corona Treater for Metalized Film Plant
Ozone Extration Blower
To achieve a brilliant blemish-free metallization coating, raw substrates must be free of surface contamination, such as migrating additives, dirt, dust, and other contaminants. Surface treatment can effectively removes organic debris from the surfaces of packaging materials such as films to retain their metallization layer and provide barrier properties at designed and acceptable level.
Eltech Corona treater system creates powerful bonding for printing, painting, coating,laminating and adhesion applications. Our technology is uniquely designed to treat 2-dimensional films, as well as many other applications requiring Improved surface energy and long-lasting activation.
The Corona treatment system is a very effective way to increase the surface tension of virtually any material. Surface treatment is required for conductive as well as non-conductive material whose normal surface tension is not sufficiently high to permit good wettability.
Corona treatment system increases the surface tension of any material respective to inks by inducing molecular changes in the surface of the material. This is done by exposing the air at the material's surface to a high-voltage electrical discharge - Corona.
|Mains Supply / Mains Frequency||415 V AC , ± 5 % , 3 Ø ,4 -Wire|
|Treatment size||600-2000 mm|
|Line speed||80-100 meter/min|
|Material||Metallised Polyester Film|
|Input frequency||50 Hz|
|Output frequency||20-50 KHZ|
|Approx Output power (Kw)||2-3 KW|
|Maximum temperature||0 ~ 50°C|
|Treatment electrode||Ceramic Electrode/Insulated Silicone Electrode|
|Dynes level||38-48 Dynes/cm|
|Length of HV cable||2.5 Mtr|
|Corona output||Constant at same speed
No influence of supply voltage
Accurate output power
Ultra high frequency using latest IGBT technology
|Certifications||CE, RoHs, ISO|